News & Blogs

Position:HOME >> News

Working Principle and Structure Introduction of Liquid Ring Vacuum Pump

From:YangTze River Time:2026/10/20 10:41:29

Liquid ring vacuum pump is a widely used positive displacement vacuum equipment in industry. It relies on working liquid to form a liquid ring for gas extraction. Featuring simple structure, it can pump gas containing water vapor and slight dust. It is widely applied in chemical industry, papermaking, mining and other industries. The working principle and main structure are introduced below.

vacuum pump

Working Principle and Structure Introduction of Liquid Ring Vacuum Pump

Working Principle

A certain amount of service water is filled into the pump casing in advance. The impeller is installed eccentrically inside the pump chamber. The motor drives the impeller to rotate. Under centrifugal force, water is thrown to the inner wall of the pump casing and forms a continuously rotating liquid ring.

Due to the eccentric installation of the impeller, crescent-shaped closed cavities are formed between blades and the liquid ring. When the cavity volume gradually increases, the internal pressure drops, and gas is sucked in through the suction port. As the impeller keeps rotating, the cavity volume shrinks, gas is compressed, and discharged through the exhaust port once reaching exhaust pressure.

The service water functions for sealing and cooling, continuously removing heat generated during compression. Part of the water will be carried out along with gas during operation, so continuous water replenishment is required to maintain a stable liquid ring.

Main Structure

Pump Casing: Main outer shell, providing cavity space for liquid ring formation.

Impeller: Core rotating part with blades, arranged eccentrically to stir working liquid.

Port Plate (Side Cover): End cover component with suction and exhaust windows to control the sequence of gas intake and discharge.

Main Shaft and Bearings: Transmit power from the motor and support stable rotation of the impeller.

Shaft Seal Assembly: Packing seal or mechanical seal, preventing air leakage and water leakage at the shaft end.

Inlet and Outlet Flanges: Interfaces for gas suction and discharge.

Auxiliary Accessories: Water supply pipe, overflow pipe and external gas-water separator, used for water replenishment, water level stabilization and gas-water separation to realize recycling of service water.

Performance Characteristics

Advantages: No dry metal friction inside, explosion-proof and safe. It can handle wet gas and gas with a small amount of dust, easy maintenance. Limitations: Ultimate vacuum is limited by water temperature; higher water temperature leads to poorer vacuum degree. Working water is consumed during operation, not suitable for ultra-high vacuum conditions.

vacuum pump

The liquid ring vacuum pump forms a dynamic liquid ring by rotation of the eccentric impeller, and realizes gas suction and compression through volume change of cavities. Its core components include pump casing, impeller, port plate and shaft seal. This pump is explosion-proof and moisture-resistant, suitable for working conditions with water vapor. However, its maximum vacuum is restricted by service water temperature. Stable pumping performance can only be guaranteed by controlling water level and water quality in daily operation.

Copyright © ZHEJIANG YANGTZE RIVER PUMP CO.,LTD.All Rights Reserved.
WhatsApp
Skype
Email
Mobile
Online
Online
Email
WhatsApp
WeChat