News & Blogs

Position:HOME >> News

Characteristics and Working Conditions of Pipeline Centrifugal Pumps

From:YangTze River Time:2026/9/18 15:27:43

The pipeline centrifugal pump is ingeniously designed by combining elements from the common vertical pumps. Additionally, based on the ISG type, different types of pumps suitable for hot water, high temperature, corrosive chemical fluids, and oil are developed. This series of products features high efficiency, energy saving, low noise, and reliable performance. Now, let's elaborate on the characteristics and working conditions of the pipeline centrifugal pump.

pipeline centrifugal pump

pipeline centrifugal pump

Characteristics of Pipeline Centrifugal Pumps

1. The pump is of vertical structure. The inlet and outlet diameters are the same and located on the same center line. It can be installed in the pipeline like a valve, with a compact and attractive appearance, small floor space, low construction cost, and can be used outdoors with a protective cover.

2. The impeller is directly installed on the extended shaft of the motor. The axial dimension is short, the structure is compact. The pump and motor bearings are reasonably configured, which can effectively balance the radial and axial loads generated by the pump operation, ensuring smooth operation, low vibration and low noise.

3. The shaft seal adopts mechanical seal or mechanical seal combination. It uses imported titanium alloy sealing rings, medium-sized high-temperature resistant mechanical seals and hard alloy materials. The wear-resistant seal can effectively extend the service life of the mechanical seal.

4. Installation and maintenance are convenient. There is no need to dismantle the pipeline system. Just remove the pump coupling nut to withdraw all rotor components.

5. According to the requirements of use, i.e., the flow rate and head, the pump can be operated in series or in parallel.

6. According to the requirements of pipeline layout, the pump can be installed vertically or horizontally.

Working Conditions of Pipeline Centrifugal Pumps

1. The suction pressure is ¡Ü 1.0 MPa, or the high working pressure of the pump system is ¡Ü 1.6 MPa. That is, the sum of the pump suction inlet pressure and the pump head is ¡Ü 1.6 MPa. The static pressure test pressure of the pump is 2.5 MPa. Please specify the system working pressure when placing an order. When the system working pressure is greater than 1.6 MPa, it should be separately proposed in the order to ensure that the flow passage and connection parts of the pump use cast steel materials during manufacturing.

2. The environmental temperature is < 40¡æ, and the relative humidity is < 95%.

3. The solid particle volume content in the medium being transported does not exceed 0.1% of the unit volume, and the particle size is < 0.2mm.

Note: If the medium used contains fine particles, please specify when placing an order so that the manufacturer can adopt wear-resistant mechanical seals.

Horizontal centrifugal pump

Horizontal centrifugal pump


The above are the detailed explanations of the characteristics of pipeline centrifugal pumps and their working conditions. This series of pumps have excellent performance, high reliability, long service life, reasonable structure, and an attractive appearance. They are at the industry-leading level.

Copyright © ZHEJIANG YANGTZE RIVER PUMP CO.,LTD.All Rights Reserved.
WhatsApp
Skype
Email
Mobile
Online
Online
Email
WhatsApp
WeChat