Detailed Explanation of Structural Characteristics and Applicable Conditions of YZE and YZA Petrochemical Process Pumps
YZA and YZE petrochemical process pumps are single-stage, end-suction, radially split horizontal overhung centrifugal pumps developed in strict accordance with API 610 (ISO 13709). In terms of standard classification, YZA belongs to OH1 (foot-supported type) and YZE belongs to OH2 (centerline-supported type). They are the most widely used standard process pumps in refinery, petrochemical, coal chemical, fine chemical and oil & gas storage facilities. This series shares a common hydraulic model with high interchangeability of components. Benefiting from the differentiated design of OH1 and OH2, they are adapted to two severe process conditions: medium temperature and high temperature. They are specially designed for conveying flammable, explosive, toxic, harmful, highly corrosive, high and low temperature process media to meet the core requirements of long-period, continuous and safe production of petrochemical plants.
YZE petrochemical process pump
Structural Characteristics of Petrochemical Process Pumps
As defined by API 610, both OH1 and OH2 are horizontal overhung pumps, and their core difference lies in the supporting structure of the pump casing, which is also the fundamental distinction between YZA and YZE: YZA = OH1 foot-supported; YZE = OH2 centerline-supported. Both models adopt radially split casings with inlet and outlet flanges arranged at the lower part of the pump and a back pull-out design. It is unnecessary to disconnect the piping when servicing the rotor and seal assembly, which greatly reduces the adverse impact of additional pipeline stress on pump operation. The casing wall is designed with sufficient safety margin for petrochemical service, with flange ratings ranging from PN16 to PN160 to withstand alternating pressure loads. Replaceable wear rings are installed inside the casing to reduce clearance leakage between impeller and casing, improve volumetric efficiency and cut maintenance cost, as worn rings can be replaced separately.
Closed impellers are standard, while semi-open impellers are available on request. With wide and smooth flow passages, they are suitable for clean media or fluids containing a small amount of fine solid particles. Impellers are dynamically balanced with high precision for low vibration and stable operation. The shaft assembly adopts an extended rigid shaft fitted with high-precision rolling bearings. The bearing housing supports oil or grease lubrication and integrates a cooling chamber; circulating cooling water can be supplied under high-temperature service to control bearing temperature rise. The seal chamber complies with API 682. Single, double and tandem cartridge mechanical seals can be equipped, together with auxiliary piping plans for flush, quench and barrier fluid, to achieve leak-free transfer of toxic, volatile, flammable and explosive media.
Detailed Explanation of Applicable Working Conditions for Petrochemical Process Pumps
A wide range of material options are available including carbon steel, 304, 316L, duplex stainless steel, Hastelloy and others, selected according to corrosion and erosion conditions for hydrocarbons, solvents, acids, alkalis and salt solutions. Both models are suitable for fluids free of large hard solids and capable of 24/7 continuous operation with explosion-proof motors complying with petrochemical hazardous area standards. They share identical hydraulic performance; only the difference between OH1 and OH2 support structures defines their service limits.
YZA petrochemical process pump
YZA (OH1) and YZE (OH2) are both API 610 standard single-stage overhung process pumps with interconnected hydraulic systems and general schemes for seal and bearing configuration. Their core difference originates from the supporting logic of the two standard types OH1 and OH2: OH1 (YZA) with foot support has a simple structure and economical installation, oriented to conventional chemical processes at normal temperature, medium temperature and moderate pressure; OH2 (YZE) with centerline support has excellent thermal expansion compensation capacity, can maintain alignment accuracy for a long time under working conditions with high temperature and large temperature variation, and is the preferred model for high-temperature petrochemical processes. The radially split casing, replaceable wear rings, standardized seal cavity and modular design with multiple materials endow this pump series with the advantages of low leakage, high reliability and convenient maintenance. In the project selection stage, a reasonable choice can be made between OH1 (YZA) and OH2 (YZE) according to medium temperature, pressure, corrosion properties and toxicity grade, matched with corresponding mechanical seals and flushing schemes to ensure the safe, stable and long-cycle operation of chemical plants.
English
ÖÐÎİæ
