News & Blogs

Position:HOME >> News

Maintenance and Usage Precautions for Submerged Pumps

From:YangTze River Time:2026/9/28 9:39:54

The Submerged Pump is a vertical pump in which the impeller, pump body and other flow components are fully submerged in the material to be transported, and is connected to the motor through a coupling. The Submerged Pump is made according to different requirements of the length of the extension into the container. The components in contact with the material of the Submerged Pump are generally selected based on the requirements of the material, and can be made of metal or non-metal materials. Now, let's take a detailed look at the maintenance and usage precautions of the Submerged Pump.

Submerged Pump

Maintenance of submerged pumps


I. Pre-starting Precautions

1. Prohibit dry running: Ensure that the liquid level is higher than the minimum immersion height of the pump and do not start the pump without water.
2. Check equipment status: The pump body is installed vertically, and the base bolts are tightened; the pipeline is free from looseness, leakage, and obstructions.
3. Electrical inspection of the motor: The wiring is firm, the grounding is reliable, and the cable is undamaged; manually turning the pump, it rotates flexibly without sticking or abnormal noise.
4. Lubrication inspection: The oil level in the bearing box is normal, the oil quality is clear without emulsification or blackish impurities.



II. Operating Procedures

1. After startup, observe the current, pressure, sound, and vibration. If any abnormalities occur, stop the machine immediately for inspection. Do not operate with faults.
2. The operating current must not exceed the rated value. Do not operate with low flow or±ï pressure for a long time to avoid pump body overheating and cavitation damage.
3. When the medium contains a lot of debris£¬ fibers£¬ and particles£¬ it is necessary to install a water inlet filter to prevent the impeller from getting tangled£¬ blocked£¬ and worn.
4. If there is severe vibration£¬ abnormal noise£¬ no liquid output£¬ large leakage£¬ or smoke from the motor£¬ immediately stop the machine urgently.

III. Daily Maintenance (Daily/Batch)

1. Clean the floating debris in the water tank to prevent it from being sucked into the pump body and causing pump jamming.
2. Check for leakage£¬ abnormal noise£¬ and abnormal vibration in the pump body. Ensure that the motor does not overheat or have an odor.
3. Confirm that the liquid level is stable to ensure that the pump works normally submerged.

IV. Regular Maintenance (Weekly/Monthly/Annually)

1. Weekly£º Check and tighten all connecting bolts£¬ check the oil level£¬ motor temperature£¬ and operating conditions.
2. Monthly£º Check the quality of the lubricating oil. Replace it in time if it is turbid£¬ contaminated with water£¬ or black. Check for aging and overheating of the cables and connection terminals.
3. Annual Overhaul£º Remove the pump body for disassembly and inspection. Clean the pump body and impeller£» replace worn bushings£¬ bearings£¬ and seals£» correct the verticality and coaxiality of the pump shaft£¬ replace the lubricating oil£¬ and perform overall debugging.

V. Shutdown Maintenance Requirements

1. Normal Shutdown£º First£¬ close the outlet valve£¬ then cut off the power and stop the machine to avoid water hammer impact and damage to the equipment.
2. Long-term Shutdown£º Rinse the pump body and pipeline£¬ drain the accumulated liquid to prevent crystallization£¬ sedimentation£¬ freezing£¬ and jamming of the impeller.
3. In humid environments£¬ take measures to prevent the motor from getting damp to avoid motor damage and burning.

VI. Safety Precautions

1. Before maintenance£¬ disassembly£¬ or cleaning the equipment£¬ power must be cut off£¬ a sign hung£¬ and the machine must be confirmed to be shut down. Do not perform work with power on.
2. When transporting corrosive or toxic media£¬ wear protective equipment and take safety precautions.
3. When lifting£¬ disassembling£¬ or installing submersible pumps£¬ lift them gently and place them down gently to prevent the long shaft from bending and deforming£¬ causing permanent vibration faults.

VII. Common Fault Prevention

1. Vacuum£¬ cavitation£º Ensure sufficient liquid level and do not operate with low liquid level.
2. Fast wear£¬ large vibration£º Ensure the pump body is installed vertically£¬ filter the medium impurities£¬ and replace the bushings and bearings regularly.
3. Blocked pump£¬ entanglement£º Install a grille in the water tank and promptly clean the floating debris.
4. Motor damage£º Do not operate with idle£¬ overload£¬ phase loss£¬ or damp conditions.



Submerged Pump
The above is a detailed explanation of the maintenance, care, and usage precautions for submersible pumps. Submersible pumps are positive-pressure conveying vertical pumps that can effectively solve problems of air resistance and cavitation. The explosion-proof grade of the conveyed materials determines the different structures, working principles, classifications, application ranges, product advantages and disadvantages, and operation methods of submersible pump products. The submersible pumps produced by YANGTZE RIVER PUMP include YW submersible sewage pumps, fiberglass reinforced plastic submersible pumps, stainless steel submersible pumps, fluoroplastic submersible pumps, and so on.


Copyright © ZHEJIANG YANGTZE RIVER PUMP CO.,LTD.All Rights Reserved.
WhatsApp
Skype
Email
Mobile
Online
Online
Email
WhatsApp
WeChat